Self-assembled peptide nanotubes (SPNTs)/SnO2nanocomposites for high-performance NO2sensing at room temperature.

Nitrogen dioxide (NO2) is a major pollutant that poses significant risks to sustainable human life. As a result, a growing focus has been placed on the development of highly selective and sensitive gas sensors for NO2. Traditional cutting-edge non-organic NO2gas detectors often necessitate stringent production conditions and potentially harmful materials, which are not environmentally friendly, and these shortcomings have limited their widespread practical use. To overcome these challenges, we synthesized self-assembled peptide nanotubes (SPNTs) through a molecular self-assembly process. The SPNTs were then combined with SnO2in varying proportions to construct NO2gas sensors. The design of this sensor ensured efficient electron transfer and leverage the extensive surface area of the SPNTs for enhanced gas adsorption and the effective dispersion of SnO2nanoparticles. Notably, the performance of the sensor, including its sensitivity, response time, and recovery rate, along with a lower detection threshold, could be finely tuned by varying the SPNTs content. This approach illustrated the potential of bioinspired methodologies, using peptide self-assemblies, to develop integrated sensors for pollutant detection, providing a significant development in environmentally conscious sensor technology.

Multi-functional ratiometric detection based on dual-emitting N-doped carbon dots.

Ratiometric fluorescence probes based on multi-emission carbon dots improve accuracy and sensitivity on detecting various environment issues. Herein, a novel dual-emitting N-doped carbon dots (N-CDs) was synthesized from citric acid and urea via a solvothermal method in N,N-dimethylformamide (DMF). The blue and orange emissions of N-CDs in water were modulated, and pure white light-emitting with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33, 0.33) was achieved. The two PL centers behaved differently for Fe3+, Cu2+ and Ag+ ions, with the limit of detection (LOD) of ppm as fluorescence probes. Additionally, N-CDs displayed unique solvatochromism phenomenon. A new green emission appeared in organic solvents and gradually quenched with the increase of solvent polarity. The ratiometric PL displayed an excellent linear response for detecting water, and the LOD was between 0.003 % and 0.3 % in DMF, ethanol, isopropanol and N-methylpyrrolidone. Furthermore, N-CDs exhibited pH-sensitive response in the range of 4.0-7.0 and temperature-dependent response during heating-cooling cycles between 15 and 70 °C. A simple, efficient and reliable multi-functional ratiometric probe for detecting metal ions, water content, pH and temperature simultaneously was realized. However, there is a need for future application research to overcome the limitation imposed by the excitation wavelength of 330 nm.

Solvent-controlled synthesis of hydrophilic and hydrophobic carbon dots.

Hydrophilicity and hydrophobicity are of paramount importance in surface chemistry. In this study, a solvent-controlled synthesis of hydrophilic and hydrophobic carbon dots (CDs) was prepared via a solvothermal process using pentafluorobenzyl alcohol as the carbon source in either deionized water or N,N-dimethylformamide (DMF) medium. By simply varying the reaction solvent to control the doping of nitrogen and fluorine elements, the hydrophilicity or hydrophobicity of the CDs could be regulated. Hydrophobic and hydrophilic CDs showed blue and green light under a UV lamp, respectively. Besides, we regulated the volume ratio of water/DMF (1 : 2, 1 : 1 and 2 : 1) in the reaction solvent to prepare amphiphilic CDs and further studied their hydrophilicity and hydrophobicity. Furthermore, the sensitivity of hydrophobic CDs to water was investigated. In water detection, the photoluminescent intensity of the blue peak and green peak showed high linearity within the water content of 4-80% and 10-80%, respectively (limit of detection = 0.08%, v/v, in DMF).

UV-enhanced NO2gas sensors based on In2O3/ZnO composite material modified by polypeptides.

This present study reported a high-performance gas sensor, based on In2O3/ZnO composite material modified by polypeptides, with a high sensibility to NO2, where the In2O3/ZnO composite was prepared by a one-step hydrothermal method. A series of results through material characterization technologies showed the addition of polypeptides can effectively change the morphology and size of In2O3/ZnO crystals, and effectively improve the sensing performance of the gas sensors. Due to the single shape and small size, In2O3/ZnO composite modified by polypeptides increased the active sites on the surface. At the same time, the gas sensing properties of four different ratios of polypeptide-modified In2O3/ZnO gas sensors were tested. It was found that the In2O3/ZnO-10 material showed the highest response, excellent selectivity, and good stability at room temperature under UV light. In addition, the response of the In2O3/ZnO-10 gas sensor showed a strong linear relationship with the NO2gas concentration. When the NO2gas concentration was 20 ppm, the response time was as quick as 19 s, and the recovery time was 57 s. Finally, based on the obtained experimental characterization results and energy band structure analysis, a possible gas sensing mechanism is proposed.

Improving the Energy Density and Efficiency of the Linear Polymer PMMA with a Double-Bond Fluoropolymer at Elevated Temperatures.

A variety of applications can be found for high-temperature film capacitors, including energy storage components and pulsed power sources. In this work, in order to increase the energy density (U e), poly(vinylidene fluoride-chlorotrifluoroethylene-double bond) (P-DB) is introduced into poly(methyl methacrylate) (PMMA) to manufacture composite films by a solution casting process. In the case of the pure PMMA film, there is significant improvement in the polarization (P max) and breakdown field (E b) of the composite film. These improvements can effectively increase the U e of the composite film at room temperature and the elevated temperature. The results show that at an elevated temperature of 90 °C and at 350 MV/m, the U e of 40 vol % P-DB reaches 8.7 J/cm3, and the efficiency (η) of 77% is also considerable. Compared with biaxially oriented polypropylene (2.0 J/cm3), the proposed film exhibits 4 times enhancement in the energy storage density, meaning that it can be an energy storage capacitor with huge potential at high temperatures.

Self-powered liquid chemical sensors based on solid-liquid contact electrification.

Triboelectric nanogenerators (TENGs) have attracted many research endeavors as self-powered sensors for force, velocity, and gas detection based on solid-solid or solid-air interactions. Recently, triboelectrification at liquid-solid interfaces also showed intriguing capability in converting physical contacts into electricity. Here, we report a self-powered triboelectric sensor for liquid chemical sensing based on liquid-solid electrification. As a liquid droplet passed across the tribo-negative sensor surface, the induced surface charge balanced with the electrical double layer charge in the liquid droplet. The competition between the double layer charge and surface charge generated characteristic positive and negative voltage spikes, which may serve as a "binary feature" to identify the chemical compound. The sensor showed distinct sensitivity to three amino acids including glycine, lysine and phenylalanine as a function of their concentration. The versatile sensing ability was further demonstrated on several other inorganic and organic chemical compounds dissolved in DI water. This work demonstrated a promising sensing application based on the triboelectrification principle for biofluid sensor development.

Origins of 1/f noise in nanostructure inclusion polymorphous silicon films.

In this article, we report that the origins of 1/f noise in pm-Si:H film resistors are inhomogeneity and defective structure. The results obtained are consistent with Hooge's formula, where the noise parameter, αH, is independent of doping ratio. The 1/f noise power spectral density and noise parameter αH are proportional to the squared value of temperature coefficient of resistance (TCR). The resistivity and TCR of pm-Si:H film resistor were obtained through linear current-voltage measurement. The 1/f noise, measured by a custom-built noise spectroscopy system, shows that the power spectral density is a function of both doping ratio and temperature.